iOttie iTap 3 Manual Del Usuario página 6

Attaching the Magnetic Ring Adapter
For devices and cases that are not Qi2 or
MagSafe compatible, please attach the
included magnetic ring adapter to the back
of your phone or phone case to enable
compatibility with the iTap 3.
Not designed for use with metal, glass, or textured
phone cases, or phones with built-in wallets or grips.
1. Clean the back
of your phone or
phone case with
the wet wipe, then
use the dry wipe.
2. Position the
alignment guide so
that the opening is
in the center of your
phone or case.
10 EN
3. Remove the
protective film from
the magnetic ring.
4. Carefully place the
magnetic ring inside
the opening on the
alignment guide and
press fimrly. Wait at
least one hour before
using.
Once attached, the ring can be removed,
but not repositioned.
11