Kidde KAL755E Manual De Instrucciones página 3

Maintenance and testing
Maintenance
Inspect the unit regularly to ensure that it is free from dust and
physical damage. Do not modify internal wiring or circuitry.
Testing
To activate an alarm, push the resettable element or turn the
key clockwise (one click). To reset the device, turn the key
anticlockwise (one click). Reset the control panel after testing.
Replacing the resettable element
Replace the resettable element (or add the breakable element)
as follows:
1. Unlock and remove the front cover as described in
"Installation" on page 2.
2. Push the element up, and then pull it out (see Figure 5).
3. Replace the resettable element (or add the breakable
element, if required).
4. Replace the front cover.
Specifications
Electrical
Operating voltage
Current consumption
Standby
Alarm
Mechanical and environmental
IP rating [1]
Backbox cable knockouts
Top
Bottom
Wire diameter (terminal block)
Minimum
Maximum
Operating environment
Operating temperature
Storage temperature
Relative humidity
Colour
Weight [2]
Dimensions [2]
[1] When used with the supplied cable gland and plugs
[2] Including the backbox, excluding cable gland and plugs
Regulatory information
This section provides a summary on the declared performance
according to the Construction Products Regulation
(EU) 305/2011 and Delegated Regulations (EU) 157/2014 and
(EU) 574/2014.
For detailed information, see the product Declaration of
Performance (available at firesecurityproducts.com).
P/N 03-0210-501-1100-02 • ISS 06OCT21
16 to 42 VDC
240 µA
2.9 mA
IP67
1 × threaded knockout (MK20)
2 × threaded knockout (MK20)
0.404 mm (26 AWG)
2.05 mm (12 AWG)
−25 to +72°C
−25 to +72°C
10 to 95% (noncondensing)
Red (RAL3028)
252 g
108 × 108 × 69 mm
EU compliance
Certification body
Manufacturer
Year of first CE marking
Declaration of
Performance number
EN 54
Product identification
Intended use
Declared performance
European Union directives
Contact information and product
documentation
For contact information or to download the latest product
documentation, visit firesecurityproducts.com.
Product warnings and disclaimers
THESE PRODUCTS ARE INTENDED FOR SALE TO AND
INSTALLATION BY QUALIFIED PROFESSIONALS.
CARRIER FIRE & SECURITY B.V. CANNOT PROVIDE ANY
ASSURANCE THAT ANY PERSON OR ENTITY BUYING ITS
PRODUCTS, INCLUDING ANY "AUTHORIZED DEALER" OR
"AUTHORIZED RESELLER", IS PROPERLY TRAINED OR
EXPERIENCED TO CORRECTLY INSTALL FIRE AND
SECURITY RELATED PRODUCTS.
For more information on warranty
disclaimers and product safety
information, please check
https://firesecurityproducts.com/policy/pro
duct-warning/ or scan the QR code:
0370
Carrier Safety System (Hebei) Co. Ltd.,
80 Changjiang East Road, QETDZ,
Qinhuangdao 066004, Hebei, China.
Authorized EU manufacturing
representative:
Carrier Fire & Security B.V.,
Kelvinstraat 7, 6003 DH Weert,
Netherlands.
2019
03-0210-360-2100
EN 54-11 Type A (Outdoor Use)
KAL755E, KAL755ES18
See the product Declaration of
Performance
See the product Declaration of
Performance
2014/53/EU (Radio Equipment Directive):
Hereby, Carrier Fire & Security declares
that this device is in compliance with the
essential requirements and other relevant
provisions of Directive 2014/53/EU.
2012/19/EU (WEEE Directive): Products
marked with this symbol cannot be
disposed of as unsorted municipal waste
in the European Union. For proper
recycling, return this product to your local
supplier upon the purchase of equivalent
new equipment, or dispose of it at
designated collection points. For more
information see: recyclethis.info.
3 / 17