Scheppach HRS250 Traduccion Del Manual De Instrucciones Originales página 18

m WARNING! This electric tool generates an electro-
magnetic field during operation. This field can impair
active or passive medical implants under certain con-
ditions. In order to prevent the risk of serious or deadly
injuries, we recommend that persons with medical im-
plants consult with their physician and the manufactur-
er of the medical implant prior to operating the electric
tool.
Residual risks
The wire rope hoist has been built in accordance with
the state of the art and recognised safety standards.
However, individual residual risks can arise during op-
eration. Furthermore, despite all precautions having
been met, some non-obvious residual risks may still
remain.
• Residual risks can be minimised if the „Safety Infor-
mation" and „Proper Use" as well as the operating
manual are completely followed.
6. Technical data
HRS250
Rated voltage 230 V~ / 50 Hz 230 V~ / 50 Hz
Nominal current
Max. power
Operating mode S3 20%
Rated load 125 kg / 250 kg
Max. hoisting
12 m / 6 m
elevation
Hoisting speed 8m/min
4m/min
Diameter of the
3,00 mm
steel wire rope
Tensile strength
of the steel wire
rope
Protection
category
Insulation class
Dimensions 400 x 130 x
L x W x H 180 mm
Weight 10,9 kg
Technical changes reserved!
18 | GB
HRS400
2,5 A 3,4 A
530 W 780 W
S3 20%
200 kg /
400 kg
12 m / 6 m
8m/min
4m/min
3,6 mm
625 kg 1000 kg
IP 54 IP 54
B B
460 x 160 x
220 mm
15,5 kg
www.scheppach.com
* Operating mode S3, periodic intermediate duty. The
mode comprises of a nominal load and downtime. The
operating time is 10 mins, the relative duty cycle is 20%
of the operating time.
The value of the A-rated noise emission at the operator
position is lower than 75 dB (sound pressure level L
The noise and vibration levels have been determined in
accordance with EN ISO 11201.
7. Unpacking
• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating instructions before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Replace-
ment parts can be obtained from your dealer.
• When ordering please provide our article number as
well as type and year of manufacture for your equip-
ment.
m ATTENTION!
The device and the packaging material are not
children's toys! Do not let children play with plas-
tic bags, films or small parts! There is a danger of
choking or suffocating!
8. Assembly (Fig. 3)
Install both mounting brackets (1) with a pipe that cor-
responds to twice the rated load of the wire rope hoist,
using 4 hex head screws, 4 washers.
The dimensions of the pipe must match the size of the
mounting brackets.
Consult a specialist.
Role: Double load capacity (Fig. 4, 5)
With the deflecting roller (13) and the additional hook
(14), the double load capacity is achieved.
).
pA