Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION / UNPACKING
You've purchased a superior key cutting machine.
The Model 044 semi-automatic Performance Series key
machine you've just purchased incorporates the latest
improvements in design for key duplicating machines of
its type.
The semi-automatic function of the 044 mans that the
machine itself supplies the proper degree of pressure
against the machine's carriage during the key duplication
process and that the "tracing" motion of the carriage while
duplicating a key is controlled by simply moving a lever!
In essence, the model 044 duplicates keys with more con-
sistent accuracy and greater speed, especially important in
Your 044 key machine has been shipped to you in a
sturdy, specially cushioned container to prevent the pos-
sibility of damage during handling and shipment. Once
the machine is removed from the carton, it should be set
up on a level workbench and wiped free of all rustproof-
The 044 has been engineered to duplicate cylinder (para-
centric) keys. It is not intended or designed for any other
purpose. The machine operator assumes all liability when
using this machine in a manner inconsistent with its stat-
ed design purpose. Refer to page 3 for complete safety
information before operating the machine.
KABA ILCO strongly recommends the use of protective
eye glasses or goggles when operating this machine, or
CAUTION!
DO NOT DESTROY OR DISCARD THIS SPECIAL SHIPPING CARTON.
STORE IT CAREFULLY IN A SAFE PLACE. THIS CARTON SHOULD BE USED
WHENEVER THE MACHINE IS MOVED OR SHIPPED.
4
Congratulations!
situations where several employees operate the machine
during the course of the day.
Featuring exclusive four-way vise jaws, the model 044 is
designed to accommodate virtually any standard cylinder
key without the need for adapters. Even double-sided
automotive keys can be duplicated with ease; the four-way
jaws include stations ideally suited to gripping these keys
and is capable of gripping them in the groove or milling for
enhanced clamping performance when necessary (See
illustration on page 10).
Unpacking instructions
ing oil. The machine is adjusted at the factory and test
keys have been cut on it, but it is recommended that you
check the adjustments to make sure they have not
slipped or shifted during transit (see page 13 "Adjusting
for depth of cut").
Safety
when in the vicinity of the machine while it is being oper-
ated. Protective eye wear prevents injuries! The machine
should be turned off before loading or unloading keys.
When the key machine is operating, be careful not to
contact the vise jaw or carriage against the cutting wheel
as this will cause damage to the cutter, jaw, or carriage.
Publicidad
