geberit MAPRESS 691.296.00.2 Manual Del Usuario página 37

ATTENTION
Leaking connection due to failed pressing sequence
▶ Have any Geberit pressing collars that have not been closed
completely, as well as the adapter jaw and pressing tool,
inspected by an authorised repair shop.
▶ Replace any connections that have not been pressed
correctly. They must not be pressed again.
1
Press the Geberit pressfitting. → See operating instructions
for the relevant pressing tool.
2
After the pressing procedure, check that the Geberit pressing
collar is fully closed.
3
Open the Geberit adapter jaw and remove it from the Geberit
pressing collar.
4
Open the Geberit pressing collar and detach it.
27021600789606923 © 12-2023
968.070.00.0(02)
EN
37