cecotec IRONHERO 1500 VITAL Manual De Instrucciones página 36

ENGLISH
WARNING:
Make sure the iron is switched off and unplugged before filling up the water tank.
Accessories assembly
Hold the device and attach the brush head correctly to the steam outlet (Fig. 3).
WARNING:
You must ensure that the iron is disconnected from the mains before installing the head brush.
Using the appliance
- Fill the water tank as described in the section "Filling the water tank."
- Connect the iron to the mains.
- After approximately 30 seconds, the indicator light will go out, indicating that the iron has
reached the temperature.
- Press the steam push button.
NOTES:
If you want to steam continuously, hold down the steam trigger, or lock it in its fixed position.
After use
When you finish ironing, unplug the appliance, allow it to cool down and store it in a dry place
out of the reach of children.
4. CLEANING AND MAINTENANCE
- Make sure the iron is unplugged from the mains before cleaning.
- Disconnect the appliance from the power supply and allow it to cool down completely
before handling it.
- Remove the brush head and clean the steam outlet with a damp cloth.
- Do not use harsh or abrasive cleaning agents or solvents.
- Do not put the garment steamer in water or any other liquid.
- Always empty the water tank after each use and rinse with clean water.
- Clean the housing with a damp cloth.
- Always ensure the steam outlet hole is clean, free from limescale and not blocked.
- Once the garment steamer is disconnected from the power outlet, cooled down, water
is emptied and the device is clean, it is recommended to wrap the cord safely around the
steamer to store in an upright position.
Cleaning water mineral deposits
To prevent minerals from building up or reduce them, follow the below recommendations:
If you do not use water with low dry residue, it is advisable to carry out this procedure once a
month.
36
IRONHERO 1500 VITAL