Silvercrest SURQ 4 A2 Instrucciones De Uso página 26

13.2. Connecting an external device to the AUX IN
connection
You can use the AUX IN jack to connect an external playback device (for example a CD
player or MP3 player).
Switch the DAB/FM clock radio to standby mode.
Switch off your external device.
Plug the end of a 3.5 mm jack cable (not supplied with the device) into the AUX IN
socket on the back of the DAB/FM clock radio.
Connect the other end of the cable to your external device.
Switch on your external device and, if necessary, the DAB/FM clock radio.
Press the button repeatedly until AUX is shown on the display. The audio signal
from your external device can now be played back.
Playback is fully controlled using the external device. Set the volume on both the
DAB/FM clock radio and the external device to an appropriate level.
14. Charging external devices
14.1. Wireless charging for smartphones
There is a QI charging pad for smartphones on the top of the device, which enables wire-
less/inductive charging.
Place the smartphone on the charging pad. Charging begins immediately. Take care to
ensure that the device is positioned correctly, to ensure that reliable charging is guar-
anteed. is shown on the display during the charging process.
The maximum charging output is 5 W.
The charging function can, where applicable, be impaired by protective cases
for the smartphone.
14.2. Charging a device via the USB port
The USB port allows you to charge external devices up to 1 A such as smartphones.
Connect the external device to the USB CHARGE 5V
26 – English
1A port.