Publicidad
Idiomas disponibles
Idiomas disponibles
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
Philips
Flat-blade screw
screwdriver (+)
Allen wrench
Pliers
(3/16") (5 mm)
DA68-02954A-09.indb 13
Socket wrench
driver (-)
(13/32") (10 mm)
English - 13
With the door opened
1. Remove 3 screws holding down the TOP
TABLE ( 1 ) and separate the connected wires.
2. Disconnect two connectors ( 2 ) on the left side
door. To remove the water coupler from the
hinge, twist and pull it from the hinge.
Remove the water line ( 3 ) while pressing the
marked part ( 4 ) of the water line coupler.
(2)
(3)
(4)
3. Pull and remove the hinge lever ( 5 ). Remove
the ground screw ( 6 ) attached to the upper
left door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges
( 7 ).
(5)
(7)
(1)
(6)
2017. 8. 8.
9:11
Publicidad
