RS Pro RS-9020 Manual De Instrucciones página 6

Motor and Phase Rotation Indicator/English
Electrical Specifications
Battery: 9 V alkaline, IEC 6LR61
Current Consumption: Max 20 mA
Battery life: Minimum 1 year for average use
Determine Rotary Field Direction
Nominal Voltage Rotary Direction: 1 to 400 V AC
Nominal Voltage phase Direction: 120 to 400 V AC
Frequency Range (fn): 2 to 400HZ
Test Currents (In per phase): Less than 3.5 m A
Non-Contact Rotary Field Indication
Frequency Range (fn): 2 to 400HZ
Determine the Motor Connection
Nominal Test Voltage (U me): 1 to 400 V AC
Nominal Test Currents (In per phase):Less than 3.5 m A
Frequency Range (fn): 2 to 400 HZ
Battery Installatlon /Replacement
CAUTION
The following safety information must be observed to ensure
maximum personal safety during the operation of this Instrument.
To avoid electric shock, disconnect the test leads before replacing
the batteries.
When replacing the instrument batteries, do not mix batteries of
different types or old and new batteries.
Check the battery polarity carefully when inserting the batteries.
To avoid electric shock, do not operate the meter until the battery
door is in place and fastened securely.
Do not short-circuit used batteries, disassemble them, or throw
them in a fire. Doing so may cause the batteries to explode.
Dispose of the used batteries in accordance with local regulations.
8
The Motor and Phase Rotation indicator uses a 9V battery (supplied).
To replace the battery, follow these steps.
1. Place the Motor and Phase Rotation indicator face down on a
nonabrasive surface and loosen the battery-door screw with a
screwdriver.
2. Lift the battery access lid away from the Motor and Phase Rotation
indicator.
3. Observe the battery polarity shown in the battery compartment.
4. Secure the battery access lid back in position with the screw.
Maintenance & Cleaning
1. Repairs or servicing not covered in this manual should only be
performed by qualified personnel.
2. Periodically wipe the case with a dry cloth. Do not use abrasives or
solvents on this instrument.
Limited Warranty
This meter is warranted to the original purchaser against defects in
material andworkmanship for 1 years from the date of purchase. During
this warranty period,RS Components will, at its option, replace or repair
the defective unit, subject to verification of the defect or malfunction.
This warranty does not cover fuses, disposable batteries, or damage from
abuse, neglect, accident, unauthorized repair, alteration, contamination,
or abnormal conditions of operation or handling. Any implied warranties
arising out of the sale of this product, including but not limited to implied
warranties of merchantability and fitness for a particular purpose,are
limited to the above. RS Components shall not be liable for loss of use
of the instrument or other incidental or consequential damages, expenses,
or economic loss, or for any claim or claims for such damage, expense
or economic loss. Some states or countries laws vary, so the above
limitations or exclusions may not apply to you. For full terms and conditions,
refer to the RS website
Motor and Phase Rotation Indicator/English
9