Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ennoLogic Dual Laser IR Thermometer - User Manual
thermometers that do not allow the emissivity to be
adjusted. If you need to take accurate readings for a
specific material often, you can measure the material
surface with an accurate contact thermometer and then
adjust the emissivity setting of your IR thermometer until
its reading matches the temperature reported by the
contact thermometer. You can then use the emissivity for
subsequent
Alternatively, you can cover materials with low emissivity
with masking tape or flat black paint. Make sure to allow
the tape or paint to reach the temperature of the material
before taking a measurement.
Material
Aluminum Foil
Asphalt
Black Body, matte
Brick, red
Chrome, polished
Concrete
Copper, polished
Fabric
Galvanized Pipe
Glass
Granite
Gypsum
Ice
Iron, polished
Iron, rusted red
Marble, white
measurements
of
the
Emissivity
0.04
0.93
1.00
0.75 - 0.93
0.05
0.85 - 0.94
0.02 - 0.05
0.87 - 0.98
0.46
0.92 - 0.95
0.45
0.85
0.97
0.14 - 0.38
0.61
0.95
9
same
material.
Publicidad
Tabla de contenido
