Pioneer D1200SPL Manual De Instrucciones página 14

Connecting the Unit
Four Amplifier (Ex. Bridge)
MODE SELECT switch
must be in MASTER
position.
MODE SELECT
switch must be in
SYNC INV position.
Before setting to the
position, remove the
screw and the stopper.
MODE SELECT
switch must be in
SYNC INV position.
Before setting to the
position, remove the
screw and the stopper.
MODE SELECT
switch must be in
SYNC INV position.
Before setting to the
position, remove the
screw and the stopper.
• Only use speakers having an impedance of 2 Ω to 16 Ω. In addition, in the case of connecting multiple
speakers with a bridge, check that the synthetic impedance is at least 2 Ω.
13
SYNC
OUTPUT
Connecting wire with
RCA pin plugs (sold
separately).
SYNC
OUTPUT
SYNC
Connecting wire with RCA
INPUT
pin plugs (sold separately).
SYNC
OUTPUT
Connecting wire with
SYNC
RCA pin plugs (sold
INPUT
separately).
SYNC
INPUT
Connect to a car stereo.
For details, see the
"Connection Diagram".
Connecting speaker
wire (sold separately).
Connecting speaker
wire (sold separately).
2 Ω to 16 Ω
4 800 W
(2 Ω DVC)