Emos GoSmart H5011 Manual Del Usuario página 7

Installation and Assembly
2.4 GHz
Pairing with the App
Installing the EMOS GoSmart App
• The app is available for Android and iOS on Google Play and App Store.
• Download the app by scanning the QR code.
5 GHz
Attention
The smart scene switch only communicates with a
ZigBee gateway, such as EMOS H5001. The ZigBee
gateway provides connection and communication
between smart ZigBee devices in the household,
allowing them to be controlled and managed
through a centralised interface. This enables au-
tomation, monitoring and centralised control over
your smart devices.
Installation
Since the device is powered solely by a battery, it
can be mounted onto a wall or attached anywhere
within the range of the ZigBee network using
the enclosed double-sided tape. The switch can,
therefore, be placed on a table, a wall or mounted
in place of a standard light switch.
The back cover of the device is also designed for
mounting into a standard junction box used for
traditional light switches. Thanks to pre-defined
openings, mounting the switch is quick and easy.
However, the junction boxes that the switch can
be mounted onto may have a different diameter.
In that case, you can drill holes into the back cover
of the smart switch to fit the given junction box.
Inserting Batteries
The device is powered by a CR2430 battery, which
is not included. The battery must be inserted into
the slot located under the rear cover of the device.
GB | 5