Celexon Seoul Manual De Instrucciones página 12

STEP 1 I MOUNTING THE CHASSIS
Screw the open end of the column with 4 hexagon socket screws (M8x25) to
the rolling frame. Make sure that the side of the column with the display holder
is mounted in the direction of the wide side of the roller frame.
Fig. 1
STEP 2 I MOUNTING THE SWIVEL HEAD
Slightly loosen the 8 screws on the swivel head (4 per side) so that the swivel
head is released from the column. Be sure to hold the swivel head while
loosening the screws and slide it to the desired position.
We recommend pushing the swivel head upwards as far as possible in order
to achieve an ergonomically favourable working position. Then tighten the 8
screws again. Make sure that the display holder is parallel to the column.
Fig. 2
4