Shark HP150EU Guia Del Usuario página 8

1. OPEN THE PACKAGED ODOUR
CARTRIDGE ASSEMBLY
Remove the odour cartridge assembly from
the cardboard box and can.
Settings: The Anti-Odour Technology dial has 4 intensity settings: Low, Medium, High, and Off.
ODOUR DIAL POSITION
Odour Cartridge Removal
• The odour cartridge can be removed if you don't want to use the Anti-Odour Technology.
• To remove the cartridge, first remove the odour cartridge assembly from the air purifier. Flip up the handle on the odour cartridge assembly
and rotate clockwise until the two arrows are aligned.Pull the handle up and remove from the air purifier.
• Hold the odour cartridge assembly so that the coloured base is visible and rotate the cartridge anticlockwise in the dial housing to remove.
• The dial housing can then be inserted into the air purifier.
Maintenance Required
• Replace the cartridge as recommended under Odour Cartridge Replacement.
• Visit sharkclean.eu to learn more and purchase replacements.
Fragrance Strength Over Time
• The intensity of the Anti-Odour Technology's fragrance may diminish over time. It may also have no noticeable fragrance at all. This is
natural and does not indicate that the technology is not working. Follow replacement instructions to ensure continued performance.
ANTI-ODOUR TECHNOLOGY
NOTE: Anti-Odour Technology is not included on all Shark HP150 series products.
2. INSERT ODOUR CARTRIDGE
ASSEMBLY INTO AIR PURIFIER
Flip up the handle on the odour dial, align
the arrows, then insert the assembly into
the air purifier.
CLICKS SETTING
1 OFF
2 LOW
3 MEDIUM
4 HIGH
SETTINGS
RECOMMENDED FOR
• When you are not actively looking
to reduce odours. This will extend
the life of the odour cartridge.
• Mild odour events such as
bin smells.
• Small spaces like a bathroom
or entryway.
• Strong odour events such as
cooking or pet smells.
• Mid-sized spaces like a bedroom
or kitchen.
• Optimal odour-reducing
performance.
• Extreme odour events such as
smoke or lingering burnt smells.
• Large spaces like a living room.
TIPS
3. ROTATE UNTIL CLICK
To lock and engage the odour cartridge
assembly, rotate it counterclockwise until it
clicks at least once. Continue to rotate the
dial toward the high position to increase
the intensity.
Note: Adjusting the fan
speed is another way to
control Anti-Odour
Technology intensity. See the
Optimising Fan Speed section
for more information.
LOW
Rotate the dial to the
Low position to decrease
intensity to the lowest level
when in use.
HIGH
Rotate the dial to the High
position to increase intensity
to the highest level when
in use.