Harman AKG HSC 271 Modo De Empleo página 23

3 Setting up
Plugging in the Connecting
Cable
ATTENTION
HSC 171 HSC 271 HSD 171 HSD 271
Insert the 6-pin mini XLR connector (1) on the connecting cable into the
matching socket (2) on the headset and push home to the point that the
connector will lock with an audible click.
Risk of injury!
Excessive volume can cause hearing loss!
Before connecting the headset to the mixing desk, ensure that the volume is set
to minimum.
Only adjust the volume once you are wearing the headset.
Setting up
23