Publicidad
Idiomas disponibles
Idiomas disponibles
• Tilt up the front of the drawer and pull straight
towards you. Then, move the drawer slightly
in the direction of the arrow in the illustration
below, and then pull out.
To re-install
• Insert the drawer into the frame rails and push
back into place.
• Slide the bin in above the desired location and
push down until it stops.
CAUTION
The drawers need to be removed before the glass
shelf above them can be lifted out.
4. Flex Zone
To remove the Flex Zone – Pull the Flex door
out to full extension. Lift the Flex Zone up, pulling
it to your body with both hands.
To re-install the Flex Zone – Open the Flex door
to full extension. Tilt the front of the Flex Zone up,
place the back of the Flex Zone onto the rails, and
then lower the front until the whole Zone rests on
the rails.
To remove the divider and the metal cooling
plate from the Flex Zone
1. Slide the divider to the end as shown.
DA68-02952B-07.indb 30
2. As the divider has the width and length bars,
push the lower part of each bar inward to
unlock. See the pictures for details.
3. Hold the divider and pull up to remove.
4. Turn over the drawer to remove the metal
cooling plate.
CAUTION
The Drawer and Metal cooling plate are heavy.
It may cause a personal injury or material damage.
To reinsert the metal cooling plate into the
Flex Zone along with the divider – Follow
the removal steps above in the reverse order to
reinsert the metal cooling plate.
Reinsert the divider into the Flex Zone firmly until
you hear a clicking sound.
If the Flex Zone or LED lighting is not
working, check the connectors [ ( 1 ), ( 2 )
shown below ] for cracks or leaks.
English - 30
2018. 7. 9.
4:54
Publicidad
