Kenmore 61101 Guía Para El Uso Y Cuidado página 6

How to Set
Push the knob in and turn in either direction to the setting
you want.
At both OFF and HI the control clicks into position.
You may hear slight clicking sounds during cooking,
indicating the control is keeping the power level you set.
A SURFACE UNIT on indicator light will glow when any
surface unit is on.
NOTE: The SURFACE UNIT on indicator light may glow
between the surface control settings of LO and OFF, but
there is no power to the surface units.
OFF OFF
Selecting types of cookware
Surface Cookware Tips
Use medium- or heavy-weight
cookwareoAluminum cookware
conducts heat faster than other
metals. Cast-iron and coated cast-
iron cookware are slow to absorb
heat, but generally cook evenly at
low to medium heat settings.
Steel pans may cook unevenly if
not combined with other metals.
Not over I inch
For best cooking results, pans
should be flat on the bottom, Match the size of the
saucepan to the size of the surface unit. The pan
should not extend over the edge of the surface unit
more than 1 inch.
Wok Cooking
We recommend that you use only
a flat-bottomed wok° They are
available at your local retail store.
Do not use woks that have
support rings. Use of these types
of woks, with or without the ring
in place, can be dangerous. Placing Use onlyflat-bottomed
woks.
the ring over the surface unit will
cause a build-up of heat that will
damage the porcelain cooktop°
Do not try to use such woks without
the ring. You could be seriously
burned if the wok tipped over.
6