Taurus SELENE COMPACT Instrucciones De Uso página 6

EN English (Original instructions)
KETTLE
SELENE COMPACT
VINTAGE COMPACT RED
VINTAGE COMPACT CREAM
DESCRIPTION
A Lid
B Lid opening button
C Filter
D Handle
E On/Off Switch
F Base
G Supply cord compartment
H Water level indicator
I Body
USE AND CARE
• Do not switch the appliance on without water.
• Do not use the appliance if the on/off switch does not
work.
• Do not move the appliance while in use.
• Use the appliance handle/s, to catch it or move it.
• Respect the MAX and MIN levels.
• Disconnect the appliance from the mains when not in use
and before undertaking any cleaning task.
• Unplug the appliance from the mains before refilling the
water tank.
• Store this appliance out of reach of children and/or
persons with physical, sensory or reduced mental or lack
of experience and knowledge.
• Do not store the appliance if it is still hot.
• Only use water with the appliance.
• The appliance is only intended for heating water. As a
consequence, the appliance should not be used for the
cooking or heating of milk.
• The use of bottled mineral water adapted for human
consumption is recommended.
• Never leave the appliance unattended while in use.
• Never leave the appliance connected and unattended if
it is not in use. This saves energy and prolongs the life of
the appliance.
• Take care when handling recipients containing liquids
heated in this appliance, as they may boil fiercely.
• CAUTION: Water condensation may appear on the
surfaces and objects around this appliance.
INSTRUCTIONS FOR USE
BEFORE USE
• Remove the appliance's protective film.
• Please read carefully the "Safety advice and warnings"
booklet before first use.
• Before using the product for the first time, boiling water to
remove all remaining dust and impurities is advisable.
FILLING WITH WATER
• You must fill the water compartment before turning on the
appliance.
• Open the lid by pressing the opening button.
• Fill the receptacle taking care to observe the MAX and
MIN levels.
• Close the lid.
• Put the container back in its place.
USE
• Take the length of the supply cord required out of the
housing.
• Attach the appliance to its base, making sure that it is
correctly fitted into place.
• Connect the appliance to the mains.
• Switch on the appliance using the on/off switch.
• Once the water has boiled, the appliance will switch off
automatically.
• The appliance can be switched on again using the switch
once the control device has cooled; if it is not switched on
again, do not force it; allow it to cool.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Unplug the appliance from the mains.
• Put the supply cord back in the supply cord compartment.
• Remove the water from the inside of the appliance.
• Clean the appliance.
SUPPLY CORD COMPARTMENT
• This appliance has a supply cord compartment situated
on its underside.
CARRY HANDLE
• This appliance has a handle on the side of the body,
which facilitates comfortable transport.
SAFETY THERMAL PROTECTOR:
• The appliance has a safety device, which protects the
appliance from overheating.
• If the appliance turns itself off and does not switch itself
on again, disconnect it from the mains supply, and wait