Be Cool BC121TU2201F Instrucciones De Uso página 163

Preparing the remote control - Inserting or replacing the battery
Please follow the instructions below:
Initial operation:
To operate the remote control for the first time, please pull out the plastic
protector from the battery compartment on the back of the remote control.
Change battery:
Pull out the battery holder on the back of the remote control and remove the old
battery from the holder:
Now insert a new CR2025 battery, always paying attention to the polarity
markings (+/-) on the battery and the battery holder.
Then push the battery holder fully back into the remote control.
1. Place the appliance on a flat and dry surface (do not use in wet
rooms).
2. Insert the plug into a standard 220~240V socket.
3. The functions of the fan can be set both with the help of the remote
control and directly on the unit with the buttons on the control
panel.
4. If the remote control is used, it must be pointed directly at the unit
to ensure proper operation.
REMOTE CONTROL
COMMISSIONING
Page 163 from 168