Publicidad
Idiomas disponibles
Idiomas disponibles
STATUS LED
When switching on, the status LED light will inform you with the battery capacity :
Continuous green
= 100 % - 30 %
Continuous orange blinking
= < 30 % (low battery indicator)
APC – Li-ion MODEL
Fig3
13. USB-C charge port
This product incorporates a built-in rechargeable battery that cannot be replaced. When utilizing this product, consider the following precautions:
Cease use if the outer casing is damaged or if battery damage is suspected. In such instances, promptly contact our customer service to mitigate the risk of
explosion and/or accidents.
Charge the device using the supplied USB cable and a suitable power source that adheres to local regulations or possesses FCC/CE/IC approval.
CHARGING :
Begin by connecting the USB charging cable to the USB-C port on the device.
Attach the opposite plug of the cable to a suitable USB power adapter with a minimum input of 1.5 A/5 V for optimal charging times, or another external
power source such as a power bank. Ensure the power source meets safety and regulatory standards.
Note: Please be cautious during the charging process and follow these instructions diligently to ensure the longevity and safety of your device.
Status LED light is orange
= charging
Status LED light is green
= fully charged
To prevent battery deterioration, please disconnect the product from the power supply device when the status LED turns green.
CHARGING BEHAVIOR :
Per KITE OPTICS experience and thanks to APC power saving functions :
Battery fully charged = 30 hours power =
up to 2 months intensive binocular use
up to 6 months average binocular use
13
Publicidad
