heatwell SMART STEEL Manual De Instrucciones página 7

Please, read carefully this user's guide before installing the device.
Make sure the supply voltage corresponds with that on the nameplate (located on the left side of the device).
Check extended user's guide on our website.
1. WALL SUPPORT
-The device includes a mounting kit with the required hardware -rawlplugs and 6 mm screws- and the wall support.
-The rawlplugs supplied with the mounting kit cannot be used on dry walls. For this type of wall, special rawlplugs must be used.
-When installing the device on the wall, the distance indicated below must be considered:
POWER
Front
Height (mm)
Width (mm)
Depth (mm)
- Once decided the location to install the device, remove the packaging and extract the device and its mounting kit
- Fix the radiator to the wall using the box as a pattern as indicated below:
Check measures and levelling before drilling. Measurements in mm
100
STEEL
800 W 1500 -2000 W
Steel RAL 9001 Steel RAL 9001
450 450
450 900
50 50
200
250
800 W Vertical 800 W
Dual Kherr
Steel RAL 9001
900 500
450 500
50 70
CLASSIC
1500 -2000 W 800 W Vertical
Dual Kherr Dual Kherr
500 1000
1000 500
70 70