Publicidad
Idiomas disponibles
Idiomas disponibles
GB
8. Faults
Warning display E
8.1
nuously
Battery pack is not charged. Excessive/insufÏcient
temperature. When the temperature of the battery
pack is between 0 °C and 50 °C, the charging
process begins automatically.
Warning display E
8.2
•
Battery pack is defective. Remove the battery
pack immediately from the charger.
•
The battery pack was not pushed correctly onto
the sliding seat (2). See chapter 7.1.
9. Repairs
Repairs to the charger must only be carried out by
qualified electricians.
If the mains connection cable of this device is
damaged, it must be replaced by the manufacturer
or the Customer Service department of the manuf-
acturer or a similarly qualified person to prevent
endangering personnel and property.
If you have CEMO charges that require repairs,
please contact your CEMO service centre. See
www.cemo.de for addresses.
8
E
lights up conti-
E
flashes
10. Environmental Protection
Observe national regulations on environmentally
compatible disposal and on the recycling of di-
sused machines, packaging and accessories.
Only for EU countries: never dispo-
se of power tools in your household
waste! According to European Directive
2012/19/EU on Waste from Electric and
Electronic Equipment and implementati-
on in national law, used power tools must
be collected separately and recycled in
an environmentally-friendly manner.
11. Technical Specifications
See page 3.
U = voltage ranges of the battery packs
C = battery pack capacity
IC = charging current
t = charging time1) 1) Depending on the residual
capacity and the temperature of the battery pack,
real charging times may deviate from the specifi-
cations.
Recommended ambient temperature when char-
ging: 0 °C to 40 °C
Changes due to technological progress reserved.
Device of protection class II
~ AC Power
Publicidad
