Bosch SDS-clic Manual Del Usuario página 11

English | 11
no longer be loosened by hand. Use a two-pin spanner to loosen,
never a pipe wrench.
Press the spindle lock button (6) to lock the grinding spindle (5)
in place (see figure B) or hold the grinding spindle (5) with a suit-
able spanner (see figure C). To tighten the quick-clamping
nut (3), turn the grinding disc firmly clockwise.
If the quick-clamping nut (3) has been attached correctly and is
not damaged, you can loosen it by hand by turning the knurled
ring anticlockwise.
Never loosen a tight quick-clamping nut (3) with pliers. Al-
ways use the two-pin spanner. Position the two‑pin spanner as
shown in the figure – see figure D.
Subject to change without notice.
Bosch Power Tools 1 609 92A 94P | (22.02.2024)