Bushnell PRO X3+ Guia De Inicio Rapido página 2

Mode Button
Slope Switch
Dual Display Button
To move the Slope Switch on or off, use right thumb to pull
down the side latch down. With other hand, pull back the
switch on both sides to enable Slope On or slide forward to
turn Slope off.
2
Fire/Power Button
Battery
Compartment
Slope On Slope Off
Basic Operation/Controls
Diopter Dial
1. Remove protective disc from battery
compartment.
2. Press Fire/Power button to activate
display and fire laser.
3. Rotate the Diopter Dial, to adjust the
eyepiece focus.
4. Press and hold Mode button to
enter Settings. Press the Mode
button to select and modify: display
brightness (red display only), Yards/
Meters, Wind on/off, Bluetooth on/
off, and Home Elevation.
5. Press Fire/Power Button, while in
Settings to advance to the next
screen.
6. While in Slope Mode, press and
release the Mode button to toggle
between
Compensation Modes.
7. Press Dual Display button to switch
between red and black displays.
8. Slope Switch enables/disables slope
mode.
Play As and Element