motion. After 15 seconds since the motion has
stopped, the lamp remains on with reduced
intensity. If it detects movement again, the
lamp turns on at a higher intensity.
3.
Mode 3: the lamp is always on with reduced
intensity regardless of whether there is motion
or not.
Note: If it is sunny outside or there are other light
sources nearby, the lamp will not light up. In these
conditions, for testing, cover the solar panel.
Installation
Fix the solar lamp on a vertical wall with the help of
the included screws, at a height of 2-3 meters from
the ground.
Warnings:
•
Do not install the lamp with the solar panel
downwards.
•
Ensure the best possible exposure of the solar
panel to the sun.
User manual
5
English