GiBiDi AGO 400 Instrucciones Para La Instalación página 12

12
UK
DEMOLITION
You have to operate the elimination of the materials in conformity with the regulations in force. All materials must be
divided by type (copper, aluminium, plastic, electrical parts, etc.).
DISMANTLING
In order to move away the automation, follow these instructions:
1 - Cut off the power supply and disconnect the electrical installation;
2 - Dismantle the control console and all the other components of the installation.
If you have noticed that some components have been damaged, you have to replace them.
USE OF THE AUTOMATION
The gearmotor AGO is designed and built for the opening of gates with max of 5 m leaf or weight max. 300Kg.
Gi.Bi.Di. Srl assumes no responsibility for a purpose other than that provided by gearmotor AGO.
Since automation can be put into motion in view by button or remotely by remote control, it is essential to check
frequently the perfect efficiency of all safety devices.
It is advisable to check periodically (every six months) the regulation of electronic friction of which must be equipped
the electronic control board.
EQUIPMENT
For the installation of the automation, the following equipment is required: wrenches, screwdriver, metre,
bubble level, saw, drill, welding machine.
PRELIMINARY CHECKS
1 - Read carefully the instructions enclosed in this manual.
2 - Make sure that the gate has a rather solid structure and that there is no friction points in its movement.
3 - Make sure that the leaf is suitably balanced, even after the installation of the gear motor.
4 - Check that the electrical installation is in accordance with the characteristic required by the gear motor.
AGO