Descargar Imprimir esta página

Ninja Foodi FLEXDRAWER AF500EU Manual De Instrucciones página 9

Ocultar thumbs Ver también para Foodi FLEXDRAWER AF500EU:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 42
COOKING IN YOUR AIR FRYER – CONT .
Bake
NOTE: The temperature is preset to 160°C
1 Install divider in the middle of the drawer.
2 Install crisper plates in the drawer
(optional), then place ingredients in the
drawer and insert drawer in unit.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2).
Select BAKE using the dial.
NOTE: To convert recipes from a traditional
oven, reduce the temperature by 10°C.
4 Use the TEMP arrows to set the desired
temperature.
5 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press START/STOP to begin cooking.
6 When cooking is complete, the unit will
beep and "End" will appear on the display.
7 Remove ingredients using silicone-tipped
tongs/utensils.
15
ninjakitchen.co.uk
Reheat
NOTE: The temperature is preset to 170°C
1 Install divider in the middle of the drawer.
2 Install crisper plates in the drawer
(optional), then place ingredients in the
drawer, and insert drawer in unit.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Select
REHEAT using the dial.
4 Use the TEMP arrows to set the desired
temperature.
5 Use the TIME arrows to set the time
in 1-minute increments up to 1 hour.
Press START/STOP to begin reheating.
6 When reheating is complete, the unit will
beep and "End" will appear on the display.
7 Remove ingredients using silicone-
tipped tongs/utensils.
Dehydrate
NOTE: The temperature is preset to 60°C
1 Install divider in the middle of the drawer.
2 Place a single layer of ingredients in the
drawer. Then install the crisper plates in
the drawer on top of the ingredients and
place another layer of ingredients on the
crisper plate.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Select
DEHYDRATE using the dial. The default
temperature will appear on the display.
Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time
in 15-minute increments from 1 to 12
hours. Press START/STOP to begin
dehydrating.
5 When cooking is complete, the unit will
beep and "End" will appear on the display.
6 Remove ingredients using silicone-
tipped tongs/utensils.
Prove
NOTE: The temperature is preset to 35°C
1 Install divider in the middle of the drawer.
2 Place dough in the drawer.
3 The unit will default to Zone 1 (to use
Zone 2 instead, select Zone 2). Select
PROVE using the dial. The default
temperature will appear on the display.
Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time in
15-minute increments from 1 to 12 hours.
Press START/STOP to begin to prove.
5 When cooking is complete, the unit will
beep and "End" will appear on the display.
6 Remove ingredients using silicone-
tipped tongs/utensils.
NOTE: When using PROVE refer to
the local food standards authority for
recommended food safe temperatures.
ninjakitchen.co.uk
16

Publicidad

loading