EuroLite WMB-6 RGB Manual Del Usuario página 23

DMX-Protocol
MASTER/SLAVE MODE
The master/slave-operation enables that several devices can be synchronized and controlled by one master-
device.
On the rear panel of the WMB-6 RGB 10mm LED Bar you can find an XLR-jack and an XLR-plug, which can
be used for connecting several devices.
This device then works as master-device and controls the slave-devices, which are to be connected to the
master-device via a stereo shielded cable. Connect the OUT-jack with the IN-plug of the next device.
SOUND CONTROL MODE
Press the MODE button and choose Sensitivity Mode. Select the desired input level (0 – 31) via the UP or
DOWN buttons
23/46 51930285_V_1_0.DOC