Publicidad
Idiomas disponibles
Idiomas disponibles
Operations
Special features
Delay End
You can set the washer to finish your wash automatically at a later time by choosing a delay of between 1 to
24 hours (in 1 hour increments). The hour displayed indicates the time the wash will finish.
1. Select a cycle. Then, change the cycle settings if necessary.
2. Press Delay End repeatedly until a desired end time is set.
3. Press and hold Start/Pause (Hold to Start).
4. To cancel Delay End, restart the washer by pressing Power.
Real-life case
You want to finish a two-hour cycle 3 hours from now. To do this, you add the Delay End option to the
current cycle with a 3-hour setting, and then press and hold Start/Pause (Hold to Start) at 2:00 pm. The
washer starts operating at 3:00 pm and ends at 5:00 pm. Provided below is the time line for this example.
2:00 pm
Set Delay End to 3 hours
ATC (Auto Temperature Control)
ATC enables the washer to control water temperatures in each washing cycle using the internal thermistor.
It is designed to maintain certain washing temperatures for best results.
NOTE
• If you select NORMAL or HEAVY DUTY, you may notice the washer supplying cold water. This is normal
because the machine is designed to reduce power consumption. In these cycles, the water temperature
for Level 5 is similar to bath-water temperatures, and Level 3 is similar to comfortable swimming pool
temperatures.
• To wash clothes at a specific temperature, you must choose a different cycle first.
40
English
Untitled-1 40
3:00 pm
Start
5:00 pm
End
2022-12-22
10:44:50
Publicidad
