Levenhuk MAGUS CHD10 Guia Del Usuario página 9

M E ASU RE MEN T
Global Precision
Calibration Line Width
Color
EndPoint
Point, Angle, Arbitrary Line, Horizontal Line, Vertical Line, Rectangle, Circle, Ellipse, Annulus, Two Circles, Polygon, Curve.
You can Left-click the
specify the parameters of the required measurement objects.
M AG NI F ICATIO N
Sets the magnification item name when calibration, such as 4X, 10X, 100X, etc. Other information could be
Name
added too, for example, microscope model, operator name, etc.
Resolution Sets the pixels per meter.
Clear All Clears all of the calibrated magnification items.
Delete Deletes the selected magnification item.
IM AGE FORM AT
Burn-in Mode: merges the measurement objects into one current image. Further edition of the measurement
objects is impossible. The changes are irreversible.
Measurement Object
Layered Mode: saves the measurement objects at different layers of the current image into the target file.
Saving Method
The measurement objects in the target file can be edited with the use of corresponding software on the PC.
The changes are reversible.
VI DEO
Fast Forward/Reverse
Sets the time interval of the playback of video files.
Interval
Video Encode You can select the video encoding format H264 or H265.
STORAGE
Storage Device SD Card is the only supported storage device.
You can select the file system format: FAT32, exFAT or NTFS. Use PC to format the SD cards and switch
File System Format of
between the file system formats. The maximum video file size of a single file is 4GB.
the Storage Device
Unknown Status: SD card not detected or the file system is not identified.
Sets the required number of digits after the decimal point. The measurement result value
will be displayed with the required precision.
Defines width of the lines for calibration.
Defines color of the lines for calibration.
Type: defines shape of the endpoints of lines for calibration: Null means no endpoints,
Rectangle means rectangle shape of endpoints. It facilitates the object alignment.
and select Measurement to open the corresponding window of settings. You can
9