Care And Cleaning Of Vacuum Cleaner - Waeco PowerVac PV100 Instrucciones De Uso

PV-100.book Seite 29 Freitag, 2. Dezember 2005 4:53 16
PowerVac PV100
➤ Connect red cable to positive pole on new battery.
➤ Connect black cable to negative pole on new battery.
➤ Place new battery (8 2, page 4) in battery compartment (8 1, page 4)
of vacuum.
➤ Lock battery in position with mounting (8 2, page 4).
➤ Close battery compartment (1 12, page 3)
➤ Charge new battery (see chapter "Charging the battery" on page 25).
10

Care and cleaning of vacuum cleaner

10.1 Cleaning the appliance and accessories
Warning!
The use of abrasive substances for cleaning may damage the
appliance.
➤ Clean casing regularly with soft damp cloth.
➤ Wash dirt canister and nozzles regularly with warm water and soap.
10.2 Clean filter
If filter is dirty, it may be cleaned and reused. If filter is extremely dirty, it may
be washed in water.
Warning!
Do not wash filter in washing machine or with hard objects, as this
may cause damage.
Proceed as follows to clean filter (see 5, page 4):
➤ Detach clips on either side of casing (7 1, page 4).
➤ Lift casing away from dirt canister and twist.
➤ Remove filter (5 1, page 4) from bracket (5 2, page 4).
➤ Shake out dust and loose dirt.
➤ Clean filter under tap if necessary.
Care and cleaning of vacuum cleaner
29