Publicidad
J..S
/
3
CLEANING
THE
HOSE
AND
NOZZLE
The vacuum cleaner stops automatically
if the nozzle, tube,
hose or filters and s-bag
TM
becomes
blocked.
In such cases
disconnect
from outlet and allow to cool for 20-30 minutes.
Clear blockage
and/or replace filters and s-bag
TM
and restart.
Tubes
and hoses
1
Use a rod or similar to clear the tubes and hose.
2
It may also be possible to remove the obstruction
in the
hose by squeezing
it. However, be careful in case the
obstruction
is caused by glass or needles caught inside
the hose.
Note:The
iuan'atlty does 1lot coiJer any dama£e to tlle hose caused by
cleatti,<q it.
Cleaning
the floor nozzle
3
To avoid deterioration
of suction power, frequently
clean
the carpet/hard
floor nozzle. The easiest way to clean it is
by using the hose handle.
4
Press each wheel-hub
and pull off the wheels.
5
Remove dust-balls,
hair or other objects that may be
entangled.
Use the crevice nozzle to clean the wheel
axles. Replace the wheels by pressing them onto the
axles,
6
Larger objects can be accessed
by removing the connec-
tion hose (press the small catches
located on each side
and simultaneously
draw the connection
tube outwards
in
an upright position).
7
Remove the object(s) and replace the connection
hose.
Cleaning
the turbo
nozzle
8
Disconnect
the nozzle from the vacuum cleaner tube and
remove entangled
threads,
etc. by snipping them away
with scissors.
Use the hose handle to clean the nozzle,
14
Publicidad
