Publicidad
Idiomas disponibles
Idiomas disponibles
Linksys XAC-Series
Wall-mounting placement
The router has two wall-mount slots on its bottom panel The distance between
the slots is 82 mm Two screws are needed to mount the router
suggested mounting Hardware
7-8 mm
1 5-2 mm
note
Linksys is not responsible for damages incurred by unsecured wall-
mounting hardware
Follow these instructions:
1. Determine where you want to mount the router Make sure that the wall
you use is smooth, flat, dry, and sturdy Also, make sure the location is
within reach of an electrical outlet
2. Using the template on the next page, drill two holes into the wall
3. Insert screws leaving 3 mm of the heads exposed
4. Position the router so the wall-mount slots line up with the two screws
5. Place the wall-mount slots over the screws and slide the router down
until the screws fit snugly into the wall-mount slots
All manuals and user guides at all-guides.com
3-5 mm
Wall-mounting template
Print this page at 100%
Cut along the dotted line, and place on the wall to drill precise spacing
82 mm
Product Overview
3
Publicidad
