STEP 5
1. Screw 4 cam bolts (A) into cam bolt holes on lower right side panel (4) and lower left side
panel (3).
STEP 6
1. Insert 2 wood dowels (C) into wood dowel holes on lower left side panel (3).
2. Attach lower left side panel (3) to rear board (6) and front panel (7) by inserting wood
dowels (C) into wood dowel holes on rear board (6) and inserting cam bolts into cam bolt holes
on front panel (7).
3. Insert 2 screws (F) through holes on lower left side panel (3), then tighten to rear board (6).
4. Insert 2 cam locks (B) into holes on front panel (7), then rotate clockwise to secure cam bolts
in place.
A
A
4
7
A
3
B
B
C
6
A
3
F
F
C