Publicidad
Idiomas disponibles
Idiomas disponibles
9 ASSEMBLY
9.1
Handle assembly
9.1.1
Mounting the lower handle. (Fig. A & C)
▪
Remove the locking knob(5) and washer on both sides, located above the rear wheels
▪
Slide the lower handle (8) over the mounting bolts located above the rear wheels.
▪
Slide the washers over the bolts.
▪
Fasten the handle with the locking knobs (5).
9.1.2
Assembly of the upper handle (Fig. A & D):
▪
Insert one long mounting bolt through the opening at one side of the lower handle(8), with
the end facing outwards.
▪
Place the upper handle(10) over the end of the bolt, install washer and upper handle
knob(9).
▪
At the opposite side, lign up the holes of the upper(10) and lower(8) handle and mount the
other long bolt.
▪
Install washer and upper handle knob(9). Tighten both knobs.
NOTE: If the lower handle (8) is loose or does not seat completely in the
slot, turn the lower handle locks clockwise to secure the handle.
9.1.3
Guiding the power cable (Fig. A & D)
▪
Guide the power cable on top of the lower and upper handlebars using the supplied cable
clips (4).
Caution: the power cable (a) must always be positioned on top of the
handlebar. This provides free movement of the cable on top of the lower
section, when the handle is folded. Incorrect mounting of the cable could
lead to damaging and/or straining it, resulting in a malfunction of the
machine. In this case the guarantee is void.
9.1.4
To lower the upper handle (Fig. A & D)
▪
Loosen the upper handle knobs (9) until the handle (10) can rotate easily.
▪
Fold the upper handle forward, the mower is now more compact for storage.
9.2
Grass box assembly (Fig. A & E)
▪
The grass box (3) comes in 3 separate parts and needs to be assembled.
▪
Put the lower part (a) on a flat surface and fit the top part (b) in place.
▪
Make sure all connecting parts snap firmly together.
▪
Fit the handle (c) to the top part in the same way.
9.3
Installing the grass box (Fig. A & B)
▪
Remove key (2) and battery pack (12).
▪
Lift the rear discharge door (18).
▪
Lift the grass box by its handle and place under the rear discharge door so that the hooks
on the grass box are seated onto the slots on the mower housing.
▪
Release the rear discharge door (18).
▪
Reinstall key and battery pack when you are ready to mow.
Copyright © 2022 VARO
POWDPG75561
P a g e
| 10
EN
www.varo.com
Publicidad
