Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
The burner is rated at 14,330 BTU/Hr.
To begin:
1. Ensure the oven has been leak-tested and properly placed.
2. Remove any remaining packing material.
3. Light the burner using the Lighting Instructions below.
Lighting Instructions
1. Ensure proper ventilation before lighting the burner.
2. Confirm that the knob is in the "OFF" position. Then, push the control knob
and slowly turn it counterclockwise to the "HI" position for 5 seconds until you
hear a click, and the burner ignites (A). If not, please repeat this process.
3. Adjust the flame from HI to LOW by slowly turning the control knob
counterclockwise (B).
4. To turn off your pizza oven, turn the control knob to the "HI" position, then
push the knob and turn it clockwise to the "OFF" position (C).
5. If the burner has not lit after retrying, wait 5 minutes, and then repeat step 2.
Lighting by Match:
1. Ensure the knob is in the "OFF" position.
2. Push down on the knob and keep pressing while turning it counterclockwise
to the "HIGH" position (listen for a clicking sound). Place the lit match near
the ports of the burner; this will ignite the burner. Observe if the burner has
lit; if not, repeat this process.
3. If the burner has not lit after retrying, wait 5 minutes, and then repeat step 2.
10
www.NutriChefKitchen.com
A
B
C
Publicidad
