Publicidad
Idiomas disponibles
Idiomas disponibles
7.3
Adjusting the base (Fig. 3)
The base (7) can be adjusted 45° (left or right) in relation to the saw direction to facilitate
contour sawing. Loosen the two screws (11) under the base, adjust the plate to the desired
angle and retighten the screws.
Angle setting can be seen on scale on top of the base.
7.4
Dust extraction
The jigsaw is equipped with a dust extractor socket. You can connect your vacuum cleaner to
the socket at the rear of the jigsaw. If you require a special adapter, please contact the
manufacturer of your vacuum cleaner.
8
TECHNICAL DATA
Rated voltage
Rated frequency
Rated power
Rotation speed
Cable length
Carbon brush motor
Cutting depth wood
Connection type
Soft grip
Power on LED light
9 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
Acoustic power level LwA
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
Copyright © 2022 VARO
POWE30010
230-240V
50Hz
450W
3000min
2m
Yes
55mm
U-shaped
Yes
Yes
86 dB(A)
97 dB(A)
4.2 m/s²
P a g e
| 6
-1
K = 1.5 m/s²
EN
www.varo.com
Publicidad
