Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION (CONTINUED)
Model HHF360 Series – Manual Surround Heat
With the Power Knob in the OFF
DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way.
The Power Knob is equipped with two (2) settings, Low and High
and the High setting uses 1500 watts of power. You can select the proper setting to accommodate your comfort
level with the Power Knob. When you choose any setting the red Power Light will come on. The Low setting
does not require as much electricity to operate. It is more energy efficient and may be a better option if you are
concerned about saving energy.
Turn the Thermostat Control fully clockwise to the highest setting.
When the room reaches a comfortable temperature, slowly turn the
Thermostat Control counter-clockwise until the heating element goes
off (the red Power Light will not be shut off). This is the point at which
the Thermostat setting equals the room temperature. At this setting, the
Thermostat will automatically turn the heater on and off to maintain the
selected temperature.
Turn the Power Knob to OFF
finished using it.
Model HHF370 Series – Digital 360° Surround Heat
Turn heater on by pressing the Power Button on
To set the Heat Level, press
1. For Low
, this setting uses 750 watts
of power
2. For High
, this setting uses 1500 watts
of power
Note: Because the Low
require as much electricity to operate, it is more
energy efficient and may be a better option if
you are concerned about saving energy.
To set the thermostat, press the up
or down
arrows until Desired
Temperature is reached. Note: the Desired
Temperature will flash three times and then
Current Temperature in the room will be
displayed.
To constantly run the heater without a thermostat setting, press the
Temperature Display. In this mode, make sure to manually shut the heater OFF when done using this appliance.
To set the Timer, press the
period in the selected mode, counting down the remaining time in the display bar and automatically shut off after
the desired time has passed.
position, plug the heater into a polarized 120V outlet.
and unplug the heater when you are
:
setting does not
button to select 1, 2, 4, or 8 hour setting. The heater will run for that chosen
Heater Operation
®
. The Low setting uses 750 watts of power
Heater with Remote Operation
®
and the heater will start at the HI Heat Level Setting.
Current Temperature/
Desired Temperature
Display
Power Light
Power Button
Temperature
Set Buttons
button until HI or LO is displayed in
4
Heat Setting
Power
Light
Thermostat Control
Heat Level
Setting
Timer
Publicidad
