Publicidad
Idiomas disponibles
Idiomas disponibles
• Oscillation selector: The appliance is designed to oscillate horizontally and
thus to efficiently ventilate large areas.
• For this, you will need to press the oscillation button (3). If you press it again,
the fan will stop oscillating and remain in the same position.
• Operating modes: The fan operates by default in "normal" mode. Press the
operating mode selector (5) once for the fan to start working in "nature"
mode and twice is you want it to work in "night" mode. To return to the
"normal" operating mode, press the mode selector a third time and the pilot
lights that show the operating mode will go off.
• Stop timer: It is possible, while the fan is working, to set it to stop auto-
matically after a preset time has passed. The fan can be programmed to stop
after 30 minutes and up to 7 hours and 30 minutes, at thirty-minute inter-
vals.
• Press the stop timer (4) once to set the timer for 30 minutes starting at that
time. After this time has passed, the appliance will stop working. Likewise,
every time you press the timer (4) will delay the automatic stop of the ap-
pliance by 30 minutes. The selected time will be shown by the pilot lights
in the screen (8). (Fig. 6)
• To deactivate the timer function, press the stop timer (4) once more after
selecting 7 hours and 30 minutes.
REMOTE CONTROL OPERATION
• The remote control unit operates with two 1.5 V LR-03 AAA alkaline batter-
ies. It is advisable to remove the batteries from the unit if it is not going to
be used for more than one month Do not mix old and new batteries.
• You can use the remote control to select the same functions as with the
buttons on the actual fan. Follow the instructions given in the previous sec-
tion.
• The range of the remote control unit is up to 6 metres from the fan. Point
it straight at the front of the fan to ensure good transmission.
• The fan will make a "beep" noise, and the lights on the digital screen will
light up, confirming that the device has received the instructions sent
through the remote control unit.
CLEANING AND MAINTENANCE
• Your appliance must be disconnected from the mains before any cleaning
operation is performed.
• Clean with a slightly damp cloth.
11
Publicidad
