Descargar Imprimir esta página

Helvex KOVA K-WC AUSTRAL L 2P Guia De Instalacion página 2

Inodoro elongado de 2 piezas 4,8 lpd, blanco

Publicidad

General Installation / Instalación General
Trace lines as indicated.
/ Trace sus líneas
2
2
como se indica.
angular valve (not included)
válvula de angular (no incluida)
90°
7,8"
(20 cm)
12"
(30,5 cm)
6,1"
(15,5 cm)
Top View /
Vista Superior
Bowl Installation / Instalación de la Taza
Install the wax ring (not included) or toilet flange (not included) and place the bowl by pressing down.
5
Instale el cuello de cera (no incluido) o la brida sanitaria (no incluida) y coloque la taza presionando hacia
abajo.
Installation using Wax Ring
Instalación usando Cuello de Cera
drain
desagüe
Insert the tank to bowl gasket into the tank base and screw the hose (not included).
7
incluida).
Drill with Ø 3/8" concrete drill bit
3
included) and
into the holes.
para concreto (no incluida) e inserte los
taquetes (incluidos) en los barrenos.
Finished Wall
Muro Terminado
drain
desagüe
Use the fixing kit provided
with the product.
Utilice el kit de fijación
contenido en el producto.
wax ring
(not included)
cuello de cera
(no incluido)
toilet flange
(not included)
brida sanitaria
(no incuida)
Fill Valve 15/16 "-14 NS-1
Válvula de Admisión
15/16"-14 NS-1
(not
insert
the anchors (included)
/
Barrene con broca de Ø 3/8"
anchors
(includes)
taquetes
(incluidos)
drain pipe
tubo de
drenaje
drill hole
barreno
/
Installation using Toilet Flange
Instalación usando Brida Sanitaria
/ Inserte el empaque esponjoso en la base del tanque y enrosque la manguera (no
hose 15/16 "-14 NS-1 to ½-14 NPSM
manguera 15/16"-14 ns-1 a ½-14 NPSM
Manually screw the nuts into the bolts and then
4
screw the bolts into the anchors, unscrew the
nuts from the bolts.
/
las tuercas en las pijas y después enrosque las
pijas en los taquetes, desenrosque las tuercas
de las pijas.
bolt with nut
pija con tuerca
nut (included)
tuerca (incluida)
drain pipe
tubo de drenaje
Insert the plastic and metal washers, screw the
6
nuts and place the nut cover caps.
rondanas de plástico y las metálicas, enrosque
las tuercas y coloque los cubre tuercas.
cover
cubierta
Do not tighten the nuts more than necessary, to
prevent damaging your product.
tuercas más de lo necesario, para evitar daños a su
producto.
tank to bowl gasket
empaque esponjoso
15 3/4" long (not included)
de 40 cm de largo (no incluida)
Manualmente enrosque
4 cm mín.
(1,57" min.)
bolt
(included)
pija
(incluida)
/
Inserte las
nut
tuerca
washer
rondana
plastic
washer
rondana
plástica
/
No apriete las
2

Publicidad

loading