Jensen power Power 2000.1 D Manual De Instalación Y Operación página 8

POWER Amplifiers
Speaker Wiring
The Speaker Wiring diagrams illustrate options for connecting one or two
speakers. Observe the proper speaker polarity.
NOTE: Power amplifiers can drive speakers with
a
nominal impedance
range of 1- 4-ohms. For maximum power, configure your speakers for
a
nomina11-ohm load.
NOTE: Do not overlook the use of the proper gauge speaker wire. The
Power series of amplifiers require
a
minimum of 12-gauge wire.
Power 2000.1 D
Two Subwoofer
SPEAKER OUTPUT
4ohm 4ohm
One Subwoofer
SPEAKER OUTPUT
4 ohm nominal
6