OPERATING INSTRUCTION
Check before turning on the machine
1. Check if the power wire is under good condition.
2. The product adopts 220-240V AC power supply, before use, please confirm if
the rated current of the power socket meets the local requirements with safe
grounding device, otherwise, please replace it with the qualified socket.
Machine startup
The power light is lit after the plug is plugged in and the power is applied; the
screen is off after a warning tone is heard and the screen is flickered once; the
machine can be started after the switch key is pressed (or ON/OFF button on the
remote controller is pressed). The machine will be operated under high gear
working state by default when it is powered on for the first time; the screen dis-
plays "HI" and the Default setting temperatureis 35°C.
Mode setting
When the Mode button is pressed, the operating mode will be switched in sequence
of "High"-"Low"-"Eco Energy Saving"-"High"
Temperature setting
When the fan Heater in ECO mode , the temperature can be set by
pressing "+" or "-", with the setting range of 5-35°C.
When the setting temperature is reached, the fan heater will stop the operation ;
when the temperature is lower than the set temperature, the machine will restart the
heating.
Timer setting
1. After the machine is powered on, the shutdown time can
be set through short-press of " Timer " button.
2. The timing button is pressed for several times, and the timing time will be set
3. After the shutdown time is set, the timing can be canceled through
long-press of Timer button.
4