Working With The Machine; On/Off Switch [1-4]; Bit Store [1-3]; Belt Clip [1-10] - Festool PDC 18/4 Manual De Instrucciones

Consider the pictures on the fold-out page.
On/Off switch
Press = ON, release = OFF
The speed of the machine depends on how far
the on/off switch is pressed in.

Bit store [1-3]

Magnetic, for storing bits and bit holders.
Belt clip
The belt clip (right/left) allows the user to attach
the machine briefly to work clothing.

Attaching the additional handle[8]

8
8-1
8-2
WARNING
Risk of injury, electric shock
Always disconnect the battery pack from the
machine before any cleaning or maintenance!
All maintenance and repair work which requires
the motor housing to be opened, must only be
carried out by an authorised service workshop.

Working with the machine

[1-4]
[1-10]

Service and maintenance

Always use the additional handle. Loss of
control can cause personal injury.
Position the additional handle [8-2] on the ex-
tension of the gearbox housing and engage the
recesses on the additional handle in the lugs on
the housing.
Turn the handle until secured in position.
Turn the handle to adjust the position in 30° in-
crements.
The drilling depth can be adjusted using the
depth stop [8-1].

Acoustic warning signal

Acoustic warning signals sound and the machine
switches off in the following operating states:
– Preset torque reached.
– "Block protect", starting torque too high.
– Machine overloaded
WARNING
Any maintenance or repair work that requires
opening of the motor or gear housing should only
be carried out by an authorised Customer Service
Centre (name supplied by your dealer)!
Maintenance or repair work carried out by an
unauthorised person can lead to the wrong con-
nection of the power cord or other components,
which in turn can lead to accidents with serious
consequences.
11