Publicidad
Idiomas disponibles
Idiomas disponibles
User Manual
01
02
03
04
Installing pdc with data and electric power
supply
Use a crosshead screwdriver to remove the top
cover, as shown in diagram 1.
You will see the base where you are going to
place it. Mark and use a drill to make the
necessary holes. Then, insert the rawlplugs and
screw the base to the floor, as shown in diagram
2.
Remove the cable tray cover
Use a flathead screwdriveras a lever by placing
it between the cover and the profile joint, as
shown in diagram 03.
Once you have removed the cable tray cover,
insert the data cables, the cover is designed for
inserting cables with or without a connector, as
it has slots at the ends of the cover in order to
insert cables with connectors.
ES EN
Publicidad
