GE GFWN1100 Manual Del Propietario E Instalación página 3

GEAppliances.com
. PROPERINSTALLATION
_b This washer must be properly installed and located in accordance with the Installation Instructions before it is used.
If you did not receive an Installation Instructions, you can receive one by visiting GEAppliances.com or by calling
800.GE.CARES (800./432.2737).
[] Ensurethat the hot water hose is connected to the "H"
(internal red screened) valve and the cold water hose is
connected to the "C" (internal blue screened)valve.
Install or store where it will not be exposed to
temperatures below freezing or exposed to the weather,
which could cause permanent damage and invalidate
the warranty.
Properlyground washer to conform with all
governing codes and ordinances. Follow details
in Installation Instructions.
[] This washer does not include water supply hoses.
GEstrongly recommends the use of factory specified
parts. A list of factory hoses available for purchase are
listed below. These hoses are manufactured and tested
to meet GE specifications.
GEstrongly recommends the use of new water supply
hoses. Hosesdegrade over time and need to be
replaced every 5 years to reduce the risk of hose failures
and water damage.
Parts and Accessories
_ - Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
DO NOT remove ground prong.
DO NOT use an adapter.
DO NOT use an extension cord.
Failure to do so can result in death, fire or electrical
shock.
Order on-line at GEApplianceparts.com
today, 24 hours a
day or by phone at 800.626.2002 during normal business
hours.
Part Number
PM!4X!O002
Or
PM!4X!O005
WX!OX!O0!!
Accessory
4 ft RubberWater Supply Hoses
4 ft Braided Metal Water Supply Hoses
Tide® Washing Machine Cleaner*
WX7X! Washer FloorTray
. WHEN NOT IN USE
[] Turn off water faucets to minimize leakage if a break
or rupture should occur. Checkthe condition of the fill
hoses;GErecommends changing the hoses every 5
years.
SAVE THESE INSTRUCTIONS
* Tide® is a registered trademark of Procter & Gamble 3