Briggs & Stratton NEMA I Manual De Instalación Y Del Propietario página 11

Brig, s& Stratton P ower P roducts Automatic Transfer Switch
Installation and Owner's Manual
TROUBLESHOOTING
Problem Cause
Automatic transfer switch does I.
not transfer to generator 2.
I.
Automatic transfer switch does
not transfer to utility
.
Generator breaker open.
Generator voltage not acceptable.
Main distribution panel breaker
open.
Utility voltage not acceptable.
Generator is still running after Engine cool down period.
switch transfers to utility power
I.
Generator is still running after
utility power is restored
I. Minimum engine run time has not
elapsed.
2. Fuse(s) in transfer switch is
defective.
Correction
I. Reset generator circuit breaker.
2. Refer to generator manual.
I. Reset main distribution panel
breaker.
2. Wait for utility voltage to return to
normal.
Engine will stop after I minute.
.
Wait five minutes for transfer
switch to retransfer to utility
power.
Check fuse(s) and replace if
necessary.
II