Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Push the ON/OFF (0/I) button located at the back of the appliance to connect power supply. There is a "D" sound and
screen will display in full for 3 seconds, then appliance enters into standby mode. Push ON/OFF (0/I) button again to
disconnect power supply.
Press
once to switch on the appliance. Press
Please note when switching off, the unit will always operate in fan mode for 60 seconds to cool down the heater element
when switching off.
SET CURRENT DAY AND TIME:
When appliance is ON, long press
•
Screen will display d1 and it flashes, then press
cycle. Press
once to confirm the current day setting
•
Then appliance enter into time setting. Hour icon flashes, press
Press
once to confirm hour
•
The unit will then enter into the minute setting mode and the minute flashes. Press
the day 1-60. After selecting the current minute. Press
•
After setting finish, press
automatically show Day, Hour, Minutes in turns within1 second each, then switch back to temperature display.
6
EN: BATHROOM HEATER | Instruction Manual
again to switch it off.
for 3 seconds to activate current day setting.
once in standby mode to check if the current day and time setting is correct. Screen will
to set Day of the week among d1, d2, d3, d4, d5, d6, d7 in
or
or
to set current hour among 00-23 in cycle.
once to confirm the time setting.
or
to set current minute of
Publicidad
