21
Heating control
1. The heater emits a beep when it turns on. The heater starts in standby mode and displays
the WiFi icon and the current room temperature in .
2. To start the heating process, press the ON/OFF
button. At the first start-up, you will see
the heating icon
and the ECO mode icon
, which means that the device is in ECO
mode. The heater has a memory function, if you turn it on after the first time, it will be in the
last operating state:
or
and
.
Note: The memory function: You can control your heater through your phone from all over
the world when the network is connected.
3. To change the heating mode, press the
UP and
DOWN buttons to switch through
the modes: ECO mode
, comfort mode
and anti-frost mode
4. To set the set temperature of one of the modes, you can press
the setting button
when the
digital light flashes, then use the
UP and
DOWN buttons to adjust the
temperature. The temperature range is from 5°C -50°C.
Note: The temperature cannot be set in anti-frost mode!.
5. To set the timer, press the setting button
when the light flashes
, use the
UP and
DOWN buttons to set the time, the timer range ranges from 1 to 24 hours. The digits flash
during the setting, then the screen returns to heating mode. The timer icon
on the screen
indicates that the timer has been set. The device heats until the time has passed.
6. To set parental controls, press and hold the
UP button. The padlock icon
appears on
the screen and the control panel locks. To unlock the lock, hold down the down button
.
The padlock icon disappears and indicates that all buttons can be used again.
7.Dmove the settings button to turn off all display lights and press any button to illuminate the
screen of the product. the product enters low-light mode after pressing the stop press the
button for 30 seconds.in the low-light mode, control the product through the APP, the
product will not sound
ln!
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany