Publicidad
Idiomas disponibles
Idiomas disponibles
Align the tongue on the battery cartridge with the groove
in the housing and slip it into place. Insert it all the way
until it locks in place with a little click.
1
Fig.6
► 1. Battery cartridge 2. Button
To remove the battery cartridge, take it out from the
appliance while sliding up the button in front of the
cartridge.
CAUTION:
Always install the battery cartridge
fully. If not, it may accidentally fall out of the appli-
ance, causing injury to you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
Installing the filter bag
CAUTION:
Do not use a damaged filter bag.
Always use the vacuum cleaner with the filter bag
properly installed. Otherwise the vacuumed dust
or particles may be exhausted from the cleaner
and they may cause respiratory disease to the
operator.
Install the filter bag before using cleaner.
Filter bag is a throw-away type. Throw away the entire
filter bag without emptying when it has become full.
NOTICE:
When the filter bag is already full or
clogged, replace with new one. Continuous use
with the filter bag full or clogged results in reduced
suction power.
NOTICE:
To prevent dust from getting into the
motor:
—
Make sure that the filter bag is installed
before use.
—
Do not use a broken or ripped bag.
Otherwise the motor may be broken.
NOTICE:
Do not fold the cardboard at its open-
ing when installing the filter bag.
NOTICE:
The filter bag for the cleaner is an
important component for maintaining the appli-
ance performance. Using non-genuine filter bag
may cause smoke or ignition.
2
NOTE: When the filter bag is not installed in the appli-
ance, the dust box cover does not close completely.
NOTE: A reusable dust bag is preinstalled in some
countries and regions. You can follow the same instal-
lation/uninstallation steps as for the filter bag.
1.
Unlock the lever and open the dust box cover.
Fig.7
► 1. Lever 2. Dust box cover
2.
Unfold the filter bag fully.
Fig.8
3.
Open the latch and insert the filter bag into the slot
on the holder so that the side with the
first.
Fig.9
► 1. Latch 2. Slot 3. Filter bag 4. Holder
8 ENGLISH
1
mark enters
1
4
2
3
2
Publicidad
