Sylvania LC195SL8 A Manual Del Usuario página 26

[] PC Settings
Thisfunctionletsyouadjustthe PC screen position, c lock and phaseduring
PC input,
1 Press [SETUP] to display the main menu.
2 Use [Cursor • /V] to select"PC SETTING",
then press [ENTER].
e.g.) PC mode
or
- WSETUP -
PICTURE
CHANNEL SETUP
V-CHIP SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [SR]GH_
COLOR TEMR [NORMAL]
_*PC SETTING
Adjust the setting.
AUTO ADJUSTMENT
Use [Cursor •/V] to select "AUTO ADJUSTMENT",
then press [ENTER].
or
- PC SETTING -
AUTOADJUSTMENT
HORIZONTALPOSITION [ 15]
VERTICAL POSITION [ q 5]
CLOCK [ 4]
PHASE [ O]
CLOCK, PHASE
Use [Cursor •Iv] to select an item,
then use [Cursor "9/1_] to adjust the "CLOCK" setting
to stabilize the PC screen and the "Phase" setting to
improve the clarity of the PC screen.
Cursor <1 Cursor I_
CLOCK
to decrease setting value to increase setting value
PHASE
Press [SETUP] to exit.
Note:
• Adjust the "PHASE"setting after the "CLOCK"setting has
been properly adjusted.
• Youmay not obtain on appropriate screen with auto
adjustment for some signals. In this case, adjust the settings
manually.
• The Horizontal/Vertical position, clock and phase of
the PC screen are automatically adjusted in a few
seconds.
HORIZONTAL POSITION, VERTICAL POSITION
Use [Cursor •Iv] to select an item,
then use [Cursor </1_] to adjust the PC screen position.
Cursor <1 Cursor I_
HORIZONTAL
to move PC screen left to move PC screen right
POSITION
VERTICAL
to move PC screen down to move PC screen up
POSITION
EN